|
|
- Two-stage twin drive system for ideal transmission ratios
- Use of standard motors 1800/1500 RPM
- Rigid durable construcion
- Wear resistant stainless steel parts in touch with product
- 2 or 3 press rolls for manual roll setting
- Taper die fit with self piloting effect
- Door hinge eithe left or right
- Rugged rolle main shaft made from highest quality stainless steel
- Overload protection system
- Automatic roll adjustment system without hydraulic/electronic components inside the die cavity
- Inlet feeder screw providing uniform distribution of material to the press chamber
- Automatic Grease lubrication system
- Range of conditioners providing optimum retention time mixing
- Computerized process control systems
|
By choosing a pellet mill from the wide range of Paladin mills, the customer is assured of many features. The die-area-to-kW combinations provide increased efficiency and through put whilst maintaining pellet quality, fewer blockagesand longer die life.
| pellet mill type | cm2 | Diam. mm | m/sec. | kW |
| 600B-130 | 2246 | 248 | 4.5 - 6.0 | 90 - 150 |
| 600B-170 | 2937 | 248 | 4.5 - 6.0 | 110 - 150 |
| 800-141 | 2879 | 298 | 4.5 - 6.5 | 110 - 150 |
| 800-175 | 3574 | 298 | 4.5 - 6.5 | 110 - 150 |
| 1200D-141 | 2879 | 298 | 5.1 - 6.5 | 150 - 180 |
| 1200D-175 | 3574 | 298 | 5.1 - 6.5 | 150 - 180 |
| 1600D-175 | 4673 | 396 | 4.7 - 7.0 | 180 - 220 |
| 1600D-210 | 5608 | 396 | 4.7 - 7.0 | 180 - 220 |
| 1600ES-210 | 5608 | 396 | 4.7 - 7.0 | 180 - 220 |
| 2000-250 | 6912 | 404 | 4.9 - 7.5 | 220 - 264 |
| 2000-300 | 8294 | 404 | 4.9 - 7.5 | 220 - 264 |
| 2400-250 | 6912 | 420 | 4.8 - 7.8 | 320 |
| 3000-300 | 9425 | 490 | 5.0 - 7.0 | 320 - 500 |
| 3000-350 | 10990 | 490 | 5.0 - 6.0 | 320 - 500 |
| 3000-380 | 13125 | 510 | 5.0 - 6.0 | 320 - 500 |
|
|
Print Version