logo-andritz-2003 Sitemap
Contact
 Home Business Portal  About Us   Products & Service   Automation   R&D   Innovation   References   Media 
NEPTUN
Automation and Control
Excitation
Power Plant Management
Monitoring
Protection
Synchronising
Turbine Controller
SCADA System
Video Surveillance
Download Area
Training
Global Presence
Search
Quicklinks
Andritz Group
» HYDRO » Automation » Video Surveillance
Video Surveillance Print Version

250 SCALA - Video Surveillance

The SCADA System

The VIDEO Surveillance solution is based on 250 SCALA, the scalable SCADA system.The powerful SCADA functionality of 250 SCALA - especially alarming and alarm displaying - are an optimal basis for video surveillance installations.

The displaying of video screens at the SCADA Client and the control of the PTZ-cameras (Pan, Tilt, Zoom) is realized by an own developed software-module. Each software-module displays one independent video stream for the  SCADA client. The module is part of the 250 SCALA editor and offers the following interactive functions in runtime mode:

  • Operation with mouse-cursor
  • Operation with mouse-cursor
  • Camera selection
  • Pan, Tilt, Zoom
  • Control of wind screen wiper
  • Saving of a single picture (Snapshot)
  • Start of video recording

Network Video-Server

Network video server are responsible for the correct transmission of the video signal. The server are fitted with camera signal inputs and TCP/IP network interfaces.

The control of the pan-, tilt- and zoom function of the camera operates via a serial interface. Video server convert the analogue PAL-signals (FBAS - 75Ohm) of the cameras to a digital one and transmit it as TCP/IP packages to the connected network - independently from the transport technology of the IP-Network. The following solutions are available:

  • for interfacing of one camera
    VIP X1
  • 2 cameras
    VIP X2
  • up to 8 cameras
    VideoJet 8008

Video Cameras

Based on the requirements we use commercial analogue or IP-Industrial cameras, with fix- or vario lens, PTZ-type, as indoor- or outdoor type. The control of the pan, tilt and zoom function of PTZ-cameras is realized by using one of the following standard protocols:

  • Pelco P
  • Sony EVI
  • Panasonic

Network and Signal Transmission

The analogue video signal transmission  between camera and Videojet is limited to the max. length of the video cable (approx. 100m). All PTZ-control signals can be interfaced via RS422/485 2 or 4 wire cable.

Larger distances require a bidirectional multimode fiber media converter (62,5µm). Videojets operate with the very efficient MPEG-4 video-compression standard.

 
Download
  Brochure 250 SCALA - Video Surveillance (e)  
  Brochure 250 SCALA - Video Surveillance (ger)  

© 2009 ANDRITZ AG, Stattegger Strasse 18, A-8045 Graz, Austria, Phone: +43 316 6902-0, Copyright / Usage Guidelines