Coil grinding lines
Our grinding lines (CGLs) operate economically, are highly flexible, environmentally compliant and result in high quality products.
During the production of hot strip, surface defects can arise which cause quality losses during the subsequent production processes. These surface defects are transferred to the rolls and roll surfaces, with the result that they are applied to the strip again. By using a strip grinder, the strip is freed from damaging surface defects.
The next process is grinding, to obtain a structured surface and to improve flatness.
During grinding, the strip is cooled by mineral oil and freed from grinding sludge. The greatest part of the oil, which is now on the strip, is removed by wipers or squeegee rolls at the end of the grinding cabins. After grinding, the oil is cleaned with the aid of a vacuum belt filter so that it can be reused. The rest of the grinding swarf is treated, briquetted and can be smelted during steel production.
Strengths and benefits
Our coil grinding, and polishing lines are capable to process strip thicknesses from 0.2 mm up to 8 mm and widths from 85 mm to 1,650 mm with process line tension of up to 400 kN. The line is supplied turnkey with all process equipment, including mechanical strip transport, the grinding heads, the cleaning system, and the electrical with complete automation systems. Auxiliary equipment, such as environmentally friendly exhaust systems, fire-protection systems and the complete grinding oil or emulsion filtration systems as well as grinding swarf reclamation is included.
Many years of experience in design, manufacture and commissioning of coil grinding lines demonstrate our expertise in supplying customized turnkey solutions.