YU vacuum drum filter
The advantages of the YU vacuum drum filter, formerly the Bird Young rotary filter, lie in thin cake applications, where highest filtration rates are combined with high washing rates, highest solids throughput rates, and all this also under gas-tight conditions.
The high-capacity YU rotary filter, formerly the Bird Young rotary filter, is the high-end solution for rotary vacuum drum filters. The YU filter is best suited for free-filtering materials, where it can benefit from the much higher filtration rates. Its unique, single-cell design provides for very high filtration capacity (5-10 times higher than conventional drum filters), excellent cake washing due to thinner cakes, and smaller space requirements.
The YU vacuum drum filter is available in various stainless steel materials and a wide range of sizes. Due to the long history of the single-cell design, the YU vacuum drum filter design has been proven in many applications.
- Highest filtration performance
- Easily accessible process area in open design
- Processing in gas-tight models
- Visual inspection of process area in gas-tight machines
- Highest vacuum area (up to 93%) due to single-cell design
- Highest solids throughput rates
- Excellent cake washing
- Ease of operation
- High rotation speed
- Quick initial formation of thin cake
- Unrestricted gas flow
|Terephtalic acid, bisphenol A, polymers, sodium sulfate, boric acid, explosives, aspirin, antibiotics, time-release medication, sodium bicarbonate|
|Winterized salad oils, stearates, sodium bicarbonate, starch|
|Average particle size||50-300 µm|
|Filtration capacity||up to 4,500 l/m2h|
|Solids throughput||up to 3,500 kg/m2h|
|Operating temperature||up to 95 °C|
The suspension to be filtered is fed continuously to the filter trough. Due to the exclusive, inverted pyramid-shaped compartment design of the trough, the slurry is distributed equally and no agitation system is needed as a result.
The single-cell drum is usually submerged for between 11% and 19% of the filtration area. Up to 93% of the filtration area is constantly under vacuum, and the drum rotates at up to 30 rpm. A thin cake forms on the drum because of the high rotation speed.
The YU filter operates on the steepest slope of the filtration curve as a result of the fast filtration possible with the open design of the filter internals (see chart with “Typical filtration curve“).
The YU vacuum drum filter builds up a vacuum with a liquid seal pump, which is connected to the drum via the separator connected in turn to the hollow axle. This causes the liquid to filter through the filter cloth. The solids contained in the suspension are deposited in a uniform layer on the filter cloth, thus forming a filter cake.
The filtered solids layer emerges from the slurry as the drum rotates and is then washed, dried, and removed from the filter cloth. The washing liquid is applied to the cake directly through wash pipes.
The filter cake is discharged by the blowback shoe, which is fitted with very close clearance to the accurately machined inside surface of the cylinder, sealing off vacuum and blow-back pressure at the point of cake discharge. Cake discharge is achieved by a pulse of gas behind the cake. The snapping action of the filter media initiated by the flow of gas discharges the cake entirely and cleans the filter medium at the same time.
As the drum rotates, it is re-immersed in the suspension. The filter cloth can be cleaned before the next filtration cycle, either by means of water jets, bubbles, or both.
- Lower space requirements
- Fewer machines required
- No agitation necessary
YU vacuum drum filter
Dimensions and weight
|12" x 4"||300||100||0,4||320||0,1||810||1.300||1.220|
|18" x 12"||450||305||1,5||810||0,5||1.850||1.830||1.470|
|18" x 24"||450||610||2,2||960||0,9||1.550||1.830||1.470|
|3' x 3'||900||915||4,0||2.230||2,8||2.340||1.400||1.400|
|4' x 4'||1.200||1.220||15,0||5.090||4,9||2.850||1.800||1.880|
|4' x 6'||1.200||1.830||15,0||5.880||7,2||3.450||1.800||1.880|
|5,5' x 6'||1.650||1.830||18,5||9.480||9,8||4.270||2.540||2.490|
|5,5' x 8'||1.650||2.440||18,5||11.045||13,0||4.880||2.540||2.490|
|5,5' x 10'||1.650||3.050||18,5||12.620||16,3||5.490||2.540||2.490|
|5,5' x 12'||1.650||3.660||22,0||14.180||19,2||6.095||2.540||2.490|
|6,5' x 12'||1.950||3.660||37,0||33.000||25,0||8.080||2.710||3.250|
|8' x 14'||2.400||4.270||45,0||50.510||35,0||9.295||3.380||4.250|
All technical data are approximate and subject to change without notice.
* Power requirements in kW for drum drive (excl. vacuum and filtrate pump), depending on application.
** Operating weight of filter includes filling (approximate data)