ANDRITZ capabilities for paper production

The new PrimeClean TO is the latest innovation in cleaners from ANDRITZ. The “TO” designation comes from the fact that it combines two cleaning stages in one unit (two-in-one). Thanks to its innovative reject chamber design, the PrimeClean TO is ideal for removing sand and small particle debris from approach flow stock and recycled fiber processing lines at higher feed consistencies. The first systems have been sold and start-up is planned for early next year.

KEEPING SKILLED PERSONNEL SAFE! It is a credit to the skills of pulp makers across the globe that there are not more accidents reported when carrying out tail threading in the drying process. ANDRITZ has created a full range of solutions for automated tail threading from the wet end to the cutter to avoid exposure to moving parts.

Over the years, ANDRITZ Chile has provided equipment maintenance, repair, and installation services to customers in the pulp and paper industry through its pulp service division. In the course of our work, we have learned that each safety situation and location demand a unique approach when it comes to the most effective channels of communication.

Even though pulp and paper mills are energy-intensive, our industry is one of least CO₂-intensive due to the wide use of bio-based and renewable fuels. The tissue and towel sector, however, emits more carbon per tonne of paper than most other paper grades, primarily due to purchased electricity from fossil-fuel sources. ANDRITZ is contributing in many ways to reduce the carbon footprint for tissue production through its “CircleToZero” initiative.

ANDRITZ Novimpianti is working with Sofidel on a groundbreaking solution to cut fossil fuel out of the tissue drying equation.

Even when the COVID-19 pandemic was at its most serious in Portugal, Papeleira Coreboard – utilizing remote assistance from ANDRITZ – still managed to start up its new, state-of-the-art LC pulping system.

Increasing capacity of the lime kiln is time consuming and costly as it usually involves the lengthening of the existing kiln shell, or even a replacement with a larger diameter. ANDRITZ experts have approached the challenge from a completely different angle, and now a capacity increase of up to 40% can be achieved at much lower costs.

ANDRITZ experts give a complete overview of its PrimeLineTAD (Through Air Drying) technoloy for the production of premium tissue products: Joseph Guadagno: Vice President Tissue and Air Systems, North America Stefano Marenco: Director PrimeLineTIAC and R&D Tissue Paul Richards: Senior Technology Manager Tissue

CircleToZero™ is a global ANDRITZ initiative with the goal of achieving zero emissions and zero waste at the same time as creating financial growth for customers. For pulp and paper producers, this means eliminating unused industry side streams, turning them into new value-added products and achieving zero emissions and zero waste production.

ANDRITZ can boost your equipment value with innovative VIB spray technology and steam-profiling solutions?

As of the beginning of July, our Paper and Board team has a new Vice President – Gerald Steiner. He joined the ANDRITZ Group one year ago and was in charge of the development and implementation of automation and digitalization in paper mills worldwide.

ANDRITZ has designed a broad range of high-consistency (HC) refiners to meet the demands of pulp, paper, panelboard, and recycle producers. At the top of the line in terms of throughput and motor power is the TX68 twin refiner.

CMPC Biopackaging – Boxboard and ANDRITZ have been collaborating successfully on ramping up mechanical pulp production for a number of years. The mill has gone from strength to strength, increasing capacity, to supply the demanding global market for high-quality, lightweight, folding boxboard.

In just two years, ANDRITZ has launched two completely new machine concepts for tissue producers to provide the very best in technology available for making specialty products with maximum efficiencies. The two concepts, the PrimeLineTEX and the PrimeLineVRT, are now available on the market and can be tested at the ANDRITZ tissue pilot plant in Graz.

Major upgrades and a series of smaller innovations have been incorporated into the new ANDRITZ PrimeFilter D to improve performance and reduce maintenance. The new design includes the latest bagless technology, which is well-proven in over 65 installations to date. The upgraded PrimeFilter D has been well-received already – 15 units have been started up and more orders are being received from leading papermakers.

Wood, pulp, and paper have long determined the fortunes of the Pöls community in Styria. Here Zellstoff Pöls AG produces longfiber sulfate pulp and kraft papers. With an additional production line based on the exceptional ANDRITZ PrimeLine paper machine, the Heinzel Group site is now focusing more than ever on the world market.

In Spectrum, we often have the privilege of reporting on new technological breakthroughs. But in this article about upgrading BM1 at PJSC Kyiv Cardboard and Paper Mill in Ukraine, that is not so much the focus. The new shoe press and calender from ANDRITZ have brought gains, true, but what was arguably most interesting in this case was …

ANDRITZ is regarded as an innovator in developing technologies for the manufacture of premium tissue grades that are in high demand today. Yet the majority of the world’s tissue is produced using conventional dry-creping techniques. To serve this large market, ANDRITZ continually enhances the reliability and performance of its “standard” technology.

ANDRITZ is fully aware of what downtime means to its customers in the paper and board industry – however, to keep ahead in a competitive environment, rebuilding, updating, and refurbishing equipment is essential. The secret is to plan well in advance, shut down quickly, get the work done fast, and then be up and running again as soon as possible.

When integrated Swedish mill Holmen Paper Hallsta wanted to further enhance its book paper production process, it called on ANDRITZ to carry out a rather unique project of utilizing two second-hand twin wire presses, and an existing, pre-used screw press to increase capacity and improve pulp quality for its PM 12.

The patented QSB forming fabric design allows producers to improve tissue product quality and machine performance.

On October 28, 2017, Laakirchen Papier AG in Austria celebrated production of its first containerboard reel: a milestone in an ambitious rebuild project that was of great strategic importance for the papermaker and for the main supplier – ANDRITZ. At the beginning of January 2019, more than one year later, PM 10 was running with basis weights of around 100 g/m2 at a speed of 1,300 to 1,330 m/min. CEO Thomas Welt comments, “We have achieved the goals set for speed development.”

The shortest route to fiber quality. Innovative GPS navigates shortest route to fiber quality at lowest cost. Like your smartphone's GPS can guide you almost anywhere in the world, the "papermaking GPS" guides you in making the right choices about fiber mix, applied energy, and paper quality. It’s significantly reducing trial and error on your machine and saving time and money.

The Holmen Group’s Braviken Paper Mill, situated in eastern Sweden, has always prided itself on being at the top of its game when it comes to production efficiency and quality of final product. When it needed to further enhance its TMP’s capacity and efficiency – but crucially keep costs to a minimum – ANDRITZ was at hand to provide a tailor-made solution.