Showcasing recent orders/projects
Customers put their trust in ANDRITZ for projects large and small. Our future business depends on our past performance. That is why references are so important to our reputation and are a good indication of how we minimize the risks to ensure a successful project. You can see a summary information of recent references in the Pulp, Paper, Power, and Service Sectors below. We accept the challenge!
Relocation and reconfiguration of mechanical pulping line for MCC Paper Yinhe Co., Ltd.
Our scope of supply comprises key equipment completing the existing used machinery to a fully fletched P-RC APMP line, as well as a new woodyard, an ANDRITZ automation system and a services package. Second-hand equipment stemming from a former conventional APMP line of the late 1990s is designed, engineered and upgraded with a new state-of-the-art P-RC APMP technology. Start-up is scheduled for mid 2013.
read more in Spectrum
P-RC APMP process
PrimeLine board machine rebuild for Količevo Karton
The challenging task was to install a new wet-end on PM3 and to incorporate a hybrid former– in a period of only 10 months! To meet the space limitations at the mill, ANDRITZ developed a completely new type of hybrid former (PrimeForm HB) – the one on PM3 is now one of the smallest in the world, performing precisely to specifications. Start-up took place in 2011.
read more in Spectrum
PrimeLine paper and board machines
PrimeLine tissue machine, Fushun Mining Group
Fushun Mining Group is a Chinese state-owned coal and oil shale company with more than 40,000 employees. The decision to add tissue production to the portfolio required Fushun to select its technology partner very carefully. ANDRITZ delivered the stock preparation technology, as well as the PrimeLine tissue machine and automation systems for the new plant. Start-up took place in 2011.
read more in spectrum
PrimeLine tissue machines
Power station in Ataka, Egypt
A comprehensive rehabilitation plan was developed for the two gas and oil fired units 1&2 (max. output 150 MWe each) at the Ataka power station, including a complete evaluation of the plant, analysis of its operating data, and further measurements for improvements.
The project was originally completed by former Waagner-Biro (now ANDRITZ Energy & Enviroment) in the early 1980’s. 30 years later the customer again selected the experienced team from ANDRITZ Energy & Environment.
ANDRITZ supplies major equipment for a new kraft pulp mill Sun Paper Holding Lao Co. Ltd., Laos
The scope of supply includes equipment for chip and bark handling, a complete fiberline (continuous cooking, washing, oxygen delignification, screening, and bleaching), the pulp drying line (wet end, dryer, cutter/layboy, and baling line), and the white liquor plant including kiln and recausticizing equipment. Start-up is scheduled for mid 2013.
ANDRITZ supplies major equipment and technologies for the pulp mill of JK Paper Ltd., India
The delivery encompasses the latest technology in woodyard equipment, a complete continuous cooking line and fiberline with an EFC bleaching plant, recovery boiler and evaporation plant, as well as the white liquor plant (kiln, recausticizing, including dregs washing/dewatering). Start-up is scheduled for late 2012.
3-loop deinking line for Yueyang Paper (Tiger Forest & Paper Group), China
3-loop deinking line with 550 t/d capacity to produce environmentally friendly copy paper and offset paper for Paper Machine No. 10, and higher quality copy paper for Paper Machine No. 9. Line uses American sorted office paper and local office waste paper to produce a deinked pulp with quality comparable to market pulp (up to 82% ISO). Start-up in 2009.
read more in Spectrum
P-RC APMP plant for Shandong Sun Paper Industry Joint Stock Co. Ltd., Shandong, China
The third line, designed for eucalyptus, started up April 2011. The pulp capacity of more than 2,000 admt/d, makes Sun Paper one of the largest mechanical pulp producers in China with the largest variety of raw materials. For all three lines, ANDRITZ MVR systems process the effluents, significanty reducing overall water consumption.
read more in Spectrum
OCC system for Shouguang Meilun Paper Co., Ltd., Shouguang City, China
Supply of complete OCC (old corrugated container) system for the production of coated testliner with a line capacity of 2,450 t/d. At start-up it will be the largest OCC line in the world. Start-up in 2012.
Largest order in ANDRITZ history: Montes del Plata in Uruguay
Montes del Plata is a 50:50 venture of Stora Enso and Arauco to build and operate a greenfield 1.3 million t/a market pulp mill in Uruguay. ANDRITZ is the main technology supplier – providing the production equipment for the woodyard, fiberline, pulp drying plant, chemical recovery, and power island.
BCTMP system for Estonian Cell AS, Kunda, Estonia
Delivery of 140,000 t/a BCTMP mill, based on P-RC APMP technology. Full-line solution for mechanical pulp incl. woodyard, fiberline, dewatering, flashdrying, slab-press, baling line. The mill is among the most modern in the world, showcasing innovations like the installation of ANDRITZ TwinFlo low-consistency refiner to further reduce energy consumption. Start-up in 2006.
read more in Spectrum
Complete pulp mill for Eldorado Celulose e Papel S.A. in Três Lagoas, Brazil
EPC delivery of the woodyard, complete fiberline (cooking, washing, screening, and bleaching systems), pulp drying equipment and baling lines, as well as the white liquor plant with recausticizing and lime kiln. With the production of 1,600,000 t/a bleached eucalyptus, the mill will be the largest pulp mill in the world. Start-up in 2012.
ANDRITZ supplied all process technologies for a greenfield pulp mill to Zhanjiang Chenming Pulp & Paper Co., Ltd.
EPC delivery of 700,000 t/a bleached hardwood pulp mill. The supply comprises woodyard, fiberline ,pulp drying, bale finishing and chemical recovery island. ANDRITZ supplied also complete stock preparation and approach flow system for a 450,000 t/a fine paper machine fine paper machine being installed at the same mill. Start-up in September-October 2011.
read more in Spectrum
Low-consistency refining at Holmen Paper, Braviken mill, Sweden
The installation of a new LC refiner at the mill is part of a public project to demonstrate dramatic reductions in energy demand for mechanical pulp production. The new, world’s largest low-consistency refiner, is a cooperative development between Holmen and ANDRITZ. Achievements could benefit TMP producers around the world. Start-up in 2008.
read more in Spectrum
Stora Enso Maxau, Germany – Hybrid design CFB boiler
Stora Enso’s Maxau mill, on the Rhein River near Karlsruhe in southwest Germany, produces SCA and SCB publication papers. The two machines, with design capacity of 540,000 t/a, and the groundwood mill are the highest energy consumers in Maxau’s process. ANDRITZ supplied a circulating fluidized bed (CFB) boiler - system PowerFluid - and FGC (dry) for production of electrical power and process steam for paper mill Maxau GmbH, Germany. Treatment of fuels with limited chlorine content - Hybrid design. Start-up in 2010.
Portucel Soporcel Group, Portugal
Delivery of two identical biomass boilers, one for Cacia, one for Setúbal. The electric power output of the plants is 15 MWe each. The boilers are based on BFB technology and the fuel used (50 MW/unit) is mainly eucalyptus bark. Start-up in 2009.
read more in Spectrum
Palm Wörth, Germany
Supply of an EcoFluid bubbling fluidized bed boiler plant to the Palm Wörth mill in Germany. The boiler plant is used for the combustion of residues from the paper mills of the Palm Group and produces electricity and process steam for the paper production. The boiler plant burns a wide range of residues including rejects, fibre sludge, biomass sludge, deinking sludge as well as biogas from the purification plant. Start-up in 2008.
Iggesund Paperboard, UK
Scope of supply includes bubbling fluidized bed boiler island as well as erection work and commissioning. The boiler will burn wood-based fuels and generate steam at the rate of 195 t/h. The boiler’s design is based on ANDRITZ’s well-proven BFB technology combining high fuel efficiency with excellent environmental performance. Start-up in 2013.
Graphic Packaging International, Macon mill, USA
Supply of bubbling fluidized bed boiler, fuel and bottom ash handling systems, and boiler safety system. The boiler is expected to make the Macon mill energy self-sufficient (electrical power and steam generation) which will reduce customer’s energy costs and dependency on fossil-fuel based alternatives. Start-up in 2013.
Fortum Termest AS, Estonia
Supply of bubbling fluidized bed boiler, fuel feeding system and ash handling equipment for a CHP plant with a production capacity of 45 MW heat (for district heating) and 24 MW electricity. The biomass fuel is mostly forest and sawmill residues from local markets, and the remaining portion will be peat. Start-up in 2010.
read more in Spectrum
E.ON’s Åbyverket power plant in Örebro, Sweden
Supply of a 70 MW biomass boiler for one of Sweden’s largest biofuel-fired cogeneration plants. Scope includes 95 t/h steam boiler based on BFB technology; external fuel handling system; flue gas cleaning and flue gas condensing; process and building electrification; instrumentation; boiler safety system, and control system. Start-up in 2012.
Sappi Manufacturing Ltd. Amakhulu: Sulfile liquor boiler plant in South Africa
World’s biggest sulfite liquor boiler plant, including a complete chemical recovery for the combustion of sulfite liquor and methanol as well as light fuel oil as back-up fuel. The steam parameters are 490° C, 86 bar and 270 t/h. Start-up in 2008.
VPK Oudegem: Rebuild of press section in Belgium
Rebuild of paper machine press section, featuring the PrimePress Trix shoe press, that accelerates dewatering, considerably lowering the cost of production. Start-up in 2010.
read more in Spectrum
LLC Pulp Invest, Russia
First PrimeLineCOMPACT plant on the Russian market: PrimeLineCOMPACT tissue machine with complete stock preparation for virgin fiber, PrimeDry Steel yankee and automation. Start-up in 2012.
more product information: Tissue machines
Mechanical pulp bleaching, Stora Enso Kvarnsveden, Sweden
High-consistency peroxide bleach plant with post-bleach washing for groundwood. Coordination, cooperation, and communication – the successful elements for any capital project – require a commitment from both supplier and customer. Start-up in 2007. Highlight: Stora Enso’s bleach plant in Kvarnsveden, Sweden was brought online within 11 months for a new SC paper grade being produced at the mill.
read more in Spectrum
OCC (old corrugated container) line for Stora Enso, Ostroleka
Complete OCC (Old Corrugated Containers) line incl. reject treatment for the new 455,000 t/y board machine, erection work, and start-up service. Final products are high-quality lightweight testliner and fluting. The reject treatment system designed for 120 t/d will supply combustible material for the existing power boiler. Start-up in 2013.
Hebei Yongxin Paper: Complete packaging paper plant in China
ANDRITZ delivered all production systems for the 400,000 t/a Kraftliner and linerboard machine: complete stock preparation plant, packaging paper machine, paper finishing equipment, complete plant automation. Start-up in 2009. Hebei could sell their products from the first paper on reel on!
read more in Spectrum
Cartiere Modesto Cardella: Rebuild of former section in Italy
The project included the first ANDRITZ gap former. Testliner machine: Modification of the approach flow, new white water system, rebuild of wet section. PrimeFlow TW two-layer headbox with PrimeProfiler dilution water control and PrimeForm TW gap former. Start-up in 2010.
read more in Spectrum
Fripa (Papierfabrik Albert Friedrich): PrimeLineCOMPACT, Germany
Successful market introduction of the PrimeLineCOMPACT tissue plant concept: from stock preparation, tissue machine, and reel to automation. Start-up in 2008.
read more in Spectrum
