gr-sustainability-overview

News: METALS

ME-portalimage-loop1
2017-12-14
ANDRITZ Herr-Voss Stamco Inc. to supply state-of-the-art multi-blanking line to Steel Technologies, Mexico

ANDRITZ Herr-Voss Stamco Inc., a member of international technology Group ANDRITZ, has received an order from Steel Technologies, headquartered in Louisville, Kentucky, to supply a new multi-blanking line for their facility in Pesquería, Nuevo León, Mexico. The line will process 150” x 74” wide material with an incoming coil capacity of 60,000 lbs.

Swiss Längsschnitt_final
2017-12-13
ANDRITZ delivers new walking beam furnace for wire mill at Swiss Steel AG

International technology group ANDRITZ has received an order from Swiss Steel AG, Switzerland, for the supply, installation, and startup of a new walking beam furnace with an output of 150 t/h for heating the continuous-cast billets at the Emmenbrücke plant, Switzerland. Start-up is scheduled for the fourth quarter of 2019.

ME-portalimage-loop1
2017-06-14
ANDRITZ acquires majority stake in Powerlase Photonics

International technology Group ANDRITZ has acquired a 50.1% stake in the British laser company Powerlase Photonics Ltd. Powerlase specializes in the manufacture of picosecond and nanosecond high-energy, diode-pumped, solid-state lasers.

ME-portalimage-loop1
2017-06-12
ANDRITZ to deliver cold-rolling mill to Risse + Wilke, Germany

International technology Group ANDRITZ has received an order from Risse + Wilke Kaltband GmbH & Co. KG, Iserlohn, Germany, to deliver a new cold rolling mill, including electrical and automation equipment.

ME-portalimage-loop1
2017-06-07
ANDRITZ to supply two walking beam furnaces to ArcelorMittal Burns Harbor, USA

International technology Group ANDRITZ has received an order from steel producer ArcelorMittal to supply two new top- and bottom-fired walking beam furnaces for its 80” hot strip mill in Burns Harbor, Indiana, USA.

ANDRITZ METALS S6-high rolling mill
2017-03-28
ANDRITZ to supply production lines to Nucor Steel Arkansas, USA

International technology Group ANDRITZ has received an order from steel producer Nucor to supply turn-key production lines for its new specialty cold rolling mill complex at the company’s sheet steel mill in Hickman, Arkansas, USA. Start-up of the plant is scheduled for the second half of 2018.

ANDRITZ METALS will supply a turnkey cold strip annealing and pickling line.
2016-02-11
ANDRITZ to supply turnkey cold strip annealing and pickling line for Acerinox, Spain

International technology Group ANDRITZ has received an order from stainless steel producer Acerinox Europa to supply a turnkey cold strip annealing and pickling line for its Campo de Gibraltar plant in Los Barrios, Spain.

ANDRITZ METALS is to supply two continuous furnace plants for the two new hot-dip galvanizing plants
2015-10-21
ANDRITZ to supply key process equipment for new hot-dip galvanizing lines for Tangshan Iron and Steel Group

International technology Group ANDRITZ has received an order to supply two continuous furnace plants for two new hot-dip galvanizing plants at Tangshan Iron and Steel Group, China.

ME-portalimage-loop1
2015-06-10
ANDRITZ METALS wins prestigious Energy Globe Award for nitrate-free production of stainless steel

International technology Group ANDRITZ has been awarded the Energy Globe Award, one of the world's most prestigious environment awards, for its environmental protection technologies PYROMARS and ZEMAP.

Photo
2015-02-04
ANDRITZ to supply aluminum production lines for the automotive industry in France and the USA

International technology Group ANDRITZ has received an order from Constellium and the joint venture Constellium/UACJ to supply two continuous annealing and pickling lines and two finishing lines for production sites in Neuf-Brisach, France, and Bowling Green, Kentucky, USA.

ME-portalimage-loop1
2014-11-18
ANDRITZ acquires Herr-Voss Stamco, USA

International technology Group ANDRITZ has acquired Herr-Voss Stamco Inc., headquartered in Callery, Pennsylvania, USA, and is thus enlarging its service and product offerings for North American customers in the metals sector.

ANDRITZ modernizes continuous annealing line No. 4 at the Andernach plant
2014-11-05
ANDRITZ to modernize continuous annealing line for ThyssenKrupp Rasselstein, Germany

International technology Group ANDRITZ has received an order from ThyssenKrupp Rasselstein, Germany, to modernize continuous annealing line No. 4 at the Andernach plant, the largest production site worldwide for packaging steel.

Pickling lines can be operated free of nitrate using ZEMAP plants from ANDRITZ.
2014-09-30
ANDRITZ receives order for second expansion stage of the Walsin Lihwa cold-rolling mill for stainless steel

International technology Group ANDRITZ has received an order from Walsin Lihwa to supply a stretch-bend-leveling line, a rolling mill, and a regeneration plant for the stainless steel cold-rolling mill in Taichung, Taiwan. Start-up is scheduled for the third quarter of 2016.

ANDRITZ will supply a turnkey walking beam furnace with a capacity of 185 t/h to voestalpine Schiene,
2014-07-02
ANDRITZ to supply new furnace plant for production of railroad tracks to voestalpine, Austria

International technology Group ANDRITZ has been awarded an order to supply a new walking beam furnace for the Donawitz plant of voestalpine Schiene GmbH, Austria, Europe’s leading supplier of railroad tracks.

ANDRITZ hot-dip galvanizing line
2014-02-19
ANDRITZ to supply new hot-dip galvanizing plant to Yieh Phui Technomaterial, China

International technology Group ANDRITZ has received an order from Yieh Phui Technomaterial, China, to supply a hot-dip galvanizing line with an annual capacity of 400,000 t.