RFA annular flange welding system
The fully automated stitch welder from the coil to the finish product
Depending on pipe diameter and pipe length, you will achieve a production output of 10-12 pieces per minute.
Flange piece with thread
Flange piece without thread
A different clamping and holding tool is required for every diameter. Retooling for a different diameter takes no more than 10 minutes, including change of material, clamping tool, as well as adjustment of the welding parameters.
Benefits at a glance
- Complete mini production plant
- Modular design
- Short changeover time
From the raw material to the strip all the way up to the finished product, the RFA operates fully automatically.
Technical data
| Parameter | Value |
| Welding diameter | min. 80 mm | 3.2" max. 250 mm | 10" |
| Material thickness | 0.3-0.9 mm | 0.012-0.035" |
| Copper wire | 2.0 mm round | 0.078“ |
| Overlap | 6.0 mm | 0.24" |
| Weld speed | 3-12 m/min | 10-40 ft/min |
