gr-sustainability-overview

News

Swiss Längsschnitt_final
2017-12-13
ANDRITZ delivers new walking beam furnace for wire mill at Swiss Steel AG

International technology group ANDRITZ has received an order from Swiss Steel AG, Switzerland, for the supply, installation, and startup of a new walking beam furnace with an output of 150 t/h for heating the continuous-cast billets at the Emmenbrücke plant, Switzerland. Start-up is scheduled for the fourth quarter of 2019.

photo-varaka
2017-12-11
ANDRITZ to supply a new stock preparation line and paper machine approach system for Varaka, Turkey

International technology Group ANDRITZ has received an order from the Turkish Albayrak Group to deliver a new stock preparation line with a design capacity of 1,000 bdmt/d for its Varaka paper mill in Balikesir, Western Turkey. ANDRITZ will also supply the main components in the approach flow systems for the top layer of PM 2. Start-up is scheduled for summer 2018.

Image Imatra vit
2017-12-07
ANDRITZ to supply flash drying line to Stora Enso, Finland

International technology Group ANDRITZ has received an order from Stora Enso Imatra Mills to supply a new flash drying line, including an ANDRITZ Twin Wire Press, fluffer, and flash dryer. Start-up of the new plant, which has a production capacity of 400 admt/d, is scheduled for the first quarter of 2019.

ANDRITZ_HCRefiner
2017-12-06
ANDRITZ to modernize stock preparation in the sack kraft paper production line at Mariysky Pulp and Paper Mill, Russia

International technology Group ANDRITZ has received an order from Mariysky Pulp and Paper Mill in Volzhsk, Russia, to upgrade the existing stock preparation line of PM 1 with state-of- the-art equipment for thickening and high-consistency refining. Start-up is scheduled for the third quarter of 2018.

ANDRITZ SmartSIM simulation based operator training_small
2017-12-05
ANDRITZ introduces SmartSIM – new simulation-based operator training

ANDRITZ SEPARATION, part of international technology group ANDRITZ, has developed a new, computer-assisted tool for operator training to maximize machine and process performance with a minimum of training time.

Photo
2017-12-04
ANDRITZ successfully starts up rebuilt paper machine for Heinzel Group in Laakirchen, Austria

International technology Group ANDRITZ has successfully started up the rebuilt PM10 at Laakirchen paper mill for the Heinzel Group, Austria. The machine that originally produced SC paper was converted to a fluting and testliner machine producing basis weights ranging from 70 to 140 g/m² based on recycled fibers.

Ichihara
2017-11-22
ANDRITZ to supply a highly efficient, biomass-fired circulating fluidized bed boiler to Japan

International technology group ANDRITZ has received an order from Mitsui Engineering & Shipbuilding Co., Ltd. (MES), Japan, to deliver a PowerFluid circulating fluidized bed boiler with flue gas cleaning system for a new biomass power plant to be built on the premises of the MES shipyard in Ichihara in the Chiba Prefecture, some 30 km to the east of Tokyo, Japan. Start-up is scheduled for the third quarter of 2020.

Ballenpresse
2017-11-14
ANDRITZ to supply baling line with bale tracking to Sappi Saiccor

International technology Group ANDRITZ has received an order from Sappi Saiccor to supply a baling line with bale tracking for its mill in Saiccor, South Africa. Start-up is scheduled for 2018.

EvaporationPlant
2017-11-07
ANDRITZ to supply evaporation plant to Iggesund Paperboard AB in Sweden

International technology Group ANDRITZ has received an order from Iggesund Paperboard AB, a member of the HOLMEN GROUP, to supply a new evaporation plant and rebuild an existing evaporation plant for the pulp mill in Iggesund.

results-q1-q3-andritz-ag_group
2017-11-03
ANDRITZ GROUP: Results for the third quarter of 2017

International technology Group ANDRITZ recorded business development in line with its own expectations in the third quarter of 2017.

EBCAMPBE_small
2017-10-31
ANDRITZ receives hydropower refurbishment contract in Canada

International technology group ANDRITZ has received a contract from SaskPower, the leading utility company in the Canadian province of Saskatchewan, to refurbish the E.B. Campbell hydroelectric power station on the Saskatchewan River. The contract value amounts to over 90 million euros.

Photo
2017-10-17
ANDRITZ starts up second tissue machine with 20-foot steel Yankee successfully at Guizhou Chitianhua, China

International technology Group ANDRITZ has successfully started up the TM6 tissue machine delivered to Guizhou Chitianhua Paper Industry Co., Ltd. (Taison Group), Guizhou Province, China. The new PrimeLineST tissue machine, with a design speed of 2,000 m/min and a paper width of 5.6 meters, will produce high-quality facial wipes and toilet paper, as well as paper tissues based on bamboo furnish.

Screw press
2017-10-04
ANDRITZ with successful upgrade of two screw presses for Metsä Board Joutseno

International technology Group ANDRITZ has successfully started up another upgraded screw press installed at the Joutseno mill of Metsä Board, Finland. This upgrade follows a separate screw press rebuild for Metsä Board Joutseno that was completed successfully in late 2016.

DSC_6310
2017-09-25
ANDRITZ Nonwoven highlights its cutting-edge technologies for the Asian markets at SINCE 2017

ANDRITZ Nonwoven, part of international technology Group ANDRITZ, will be presenting innovative nonwovens production solutions that target technologies for the Asian markets at SINCE 2017 in Shanghai, China (November 08-10, hall 1, booth 1K10).

Fibria_at_night
2017-09-21
ANDRITZ successfully starts up Fibria’s new pulp mill in Três Lagoas, Brazil

International technology Group ANDRITZ has completed start-up of key production technologies and equipment for Fibria’s new pulp mill in Três Lagoas, Mato Grosso do Sul, Brazil. All ANDRITZ processes were started up successfully on schedule.

power systems
2017-09-20
ANDRITZ to supply Thailand’s first bubbling fluidized bed boiler for thermal utilization of production residue from the paper industry

International technology group ANDRITZ has received the order from Marubeni, Tokyo, Japan, to supply an EcoFluid fluidized bed boiler with flue gas cleaning system for a waste-to-energy power plant at SCG Packaging’s Ban Pong paper mill, located in Ratchaburi, Thailand.

Vertical-volute-pumps
2017-09-15
ANDRITZ to supply irrigation pumps to India

International technology Group ANDRITZ has received an order from Megha Engineering & Infrastructures Ltd. (MEIL), Hyderabad, India, to equip three pumping stations with a total of 27 vertical volute pumps near the village of Kaleshwaram in the Indian state of Telangana. The order value is more than 60 million euros. Start-up is scheduled for June 2018.

Photo
2017-09-07
ANDRITZ: Tissue machine with 20-foot steel Yankee started up successfully at Guizhou Chitianhua, China

International technology Group ANDRITZ has successfully started up the TM5 tissue machine delivered to Guizhou Chitianhua Paper Industry Co., Ltd. at its location in Chishui, Guizhou Province. The new PrimeLineST tissue machine, with a design speed of 2,000 m/min and a paper width of 5.6 meters, will produce high-quality facial wipes, toilet paper, and paper tissues based on bamboo furnish.

hy-feigning-china_pi-2017-09-04
2017-09-04
ANDRITZ to supply pump turbines for the world’s largest pumped storage power station

International technology group ANDRITZ has received a contract from the state-owned Chinese energy utility company Fengning Pump Storage Co. Ltd., State Grid Xinyuan Co. Ltd. to supply two variable speed pump turbines for the new Fengning pumped storage power plant in Hebei Province, China.

PrimeLineTIAC der ANDRITZ-GRUPPE am Standort Graz, Österreich
2017-09-01
ANDRITZ with the world’s most modern research and development center for tissue

International technology Group ANDRITZ will officially open the world’s most modern research and development center for tissue, the PrimeLineTIAC Tissue Innovation and Application Center, at its Graz location in March 2018.

pp-portalimage-loop1
2017-08-17
ANDRITZ successfully starts up key production technologies for Metsä Group’s new bioproduct pulp mill in Finland

International technology Group ANDRITZ has successfully completed start-up of the key production technologies for Metsä Group’s new bioproduct pulp mill with an annual capacity of 1.3 million tons of pulp in Äänekoski, Finland. All ANDRITZ processes were started up successfully according to the agreed schedules.

pp-portalimage-loop1
2017-08-11
ANDRITZ to supply a sludge handling system to Monalisa Co. Ltd., South Korea

International technology Group ANDRITZ has received an order from Monalisa Co. Ltd., Seoul, South Korea, to supply the key components for a new sludge dewatering process to be installed at its tissue production line in Jeonju.

results-h1-andritz-ag_group
2017-08-04
ANDRITZ GROUP: Results for the first half of 2017

International technology Group ANDRITZ saw satisfactory business development in the first half of 2017.

picture_press-release-ao_group
2017-07-31
ANDRITZ MeWa successfully starts up new refrigerator recycling plant at AO Recycling

ANDRITZ MeWa, part of international technology Group ANDRITZ, has successfully completed the launch of a refrigerator recycling plant at AO Recycling in Telford, United Kingdom.

SCR II
2017-07-25
ANDRITZ AG to deliver DeNOx plant to Currenta GmbH & Co. OHG, Germany

International technology group ANDRITZ has received an order from Currenta GmbH & Co. OHG to deliver a SCR DeNOx plant (SCR: Selective Catalytic Reduction) for the hazardous waste incineration plant in Bürrig at its CHEMPARK site in Leverkusen, Germany.

picture_neXline Nadelvilies_group
2017-07-21
ANDRITZ to supply a complete needlepunch line to Autoneum, Mexico

ANDRITZ has received an order from Autoneum, headquartered in Winterthur, Switzerland, to supply an ANDRITZ neXline needlepunch eXcelle line to its plant in San Luis Potosi, Mexico, for the production of needlepunched velour felts from 300 to 900 gsm for the automotive market. The fabrics will be used for manufacture of carpet systems, inner dashes, and floor insulators.

ANDRITZ_Schuhpresse
2017-07-12
ANDRITZ to supply tissue production line with the latest shoe press technology to Vajda Papír

International technology Group ANDRITZ has received an order from Vajda Papír to supply a complete tissue production line for its mill in Dunaföldvár, Hungary. Start-up is scheduled for March 2018.

picture-news-Panelboard-PressRelease-Kijchai_300dpi_group
2017-07-11
ANDRITZ to supply the fifth pressurized refining system within two years to Thailand

International technology Group ANDRITZ has received an order from S. Kijchai Enterprise PCL (SKN), Huay-Yang, Thailand, to supply another pressurized refining system for MDF (medium-density fiberboard) production line II at the mill in Rayong, Thailand.

pp-portalimage-loop1
2017-07-11
ANDRITZ and Metsä Fibre successfully perform joint program to eliminate fossil fuel use in lime kiln at Joutseno mill, Finland

ANDRITZ and Metsä Fibre have successfully collaborated on a program to maximize reduction of the use of fossil fuels, as well as improve the overall performance of the lime kiln at the Joutseno mill in Finland.

AA-portalimage-loop2
2017-07-10
ANDRITZ AUTOMATION opens two new offices to expand its presence in North America

ANDRITZ AUTOMATION, part of international technology Group ANDRITZ, has opened two new US locations in Pensacola, Florida, and Eugene, Oregon, thus demonstrating its commitment to provide its customers with individual and local support.