ANDRITZ picture 
  • ANDRITZ GROUP
  • METALS products
  • Carbon steel: Regeneration
  • HCl regeneration plants

HCl regeneration plants

Nowadays, carbon steel is pickled with hydrochloric acid.

The waste acid generated can either be discharged – which results in high costs and high fresh acid demand – or regenerated. The ANDRITZ HCl regeneration technology includes systems for hydrochloric acid, which is used either in carbon steel pickling or for the production of metal oxides.

ANDRITZ picture

Regeneration plant

HCl regeneration technology

Waste acid is thermally decomposed in a reactor with direct firing. This reactor can be either a spray roaster or fluid bed type. Rinse water from the pickling line is used for absorption of the hydrogen chloride, thus producing regenerated acid with a concentration of up to 18% HCl. Off-gas cleaning is imperative in order to meet the most stringent emission standards. If the specially designed WAPUR​​​​​​​ process is also used, high-quality oxide is obtained as a by-product.

Acid recovery is an important part of the overall pickling process, in both economic and environmental terms. Nowadays, practically all the acid used in pickling is recovered, thus consumption of fresh acid is extremely low. The choice of either a spray roasting or a fluid bed process for this purpose depends on the situation at the customer’s plant.

Spray roasting generates a by-product of powdery red iron oxide, which can be used for many applications, especially in ferrite magnets and pigments. The WAPUR process developed by ANDRITZ can improve many impurities from the pickle liquor, and the resulting oxide has a higher value than the standard grades.

The by-product of the fluid bed process is a heavy, gray granular oxide, which can be recycled to the iron-making process or used for applications such as counterweights and the like.

Our plants are operated using state-of-the art PLC and control systems as well as our highly developed software. Furthermore, all operation and simulation modes are covered, paired with highest availability and safety for your personnel and for the plant.

ANDRITZ picture 

Advanced 3D design and modelling tools

ANDRITZ picture 

Reactor base

Benefits of HCl regeneration technology

  • Proven and sophisticated design with more than 200 references worldwide
  • Most stringent requirements regarding process technology, reliability, efficiency, and maintenance
  • Recycling of hydrochloric acid with an efficiency of 99.5%
  • Closed acid loop between the pickling plant and the regeneration system
  • Waste pickle liquors containing unwanted elements can be treated
  • Rinse water can be used as absorption water in the regeneration plant, thus reducing, or in most cases completely eliminating the requirement of neutralization capacity for the process
  • Reactors can be heated with any gaseous or liquid fuels
  • High-purity iron oxide as a by-product with the WAPUR process

Find out more ...

Automation solutions for the metals industry

Electric and automation solutions for all our products

read more

Service solutions for the metals industry

ANDRITZ METALS supports you in the whole lifetime cycle

Read more

Download center

Brochures and further information about our processing lines, products, equipment and lifetime service.

Go to download center