ANDRITZ Pumps

High-pressure pumps

Sturdy bearing assembly and axial heat expansion

ANDRITZ high-pressure pumps are designed for highest flexibility. Numerous horizontal and vertical models allow for efficient building designs. A variety of material and sealing versions guarantee optimal adaptability to the medium. Different hydraulic systems for each pump size enable a selection at the best efficiency point. These pumps are used for various high-pressure municipal and industrial applications, e.g. water supply, irrigation, circulation, boiler feed, and drainage.

High-pressure pumps, MP series

The high standard of the ANDRITZ multi-stage high-pressure pumps from the MP series is based on decades of experience in designing hydraulic machines and on extensive process know-how. The pumps are installed for conveying clean and slightly contaminated media such as cold and hot water, condensate, deionized water, oils, and suspensions.

The high-pressure pumps in the MP pump series are designed according to a strict modular system. With this system, different design variants can be supplied according to the customer‘s requirements quickly, easily and economically, without customizing and using a minimum number of components. For more information on our high-pressure pumps from the MP series please have a look at our brochures in the sidebar or contact us directly.

ANDRITZ high-pressure pump, MP series

© ANDRITZ

ANDRITZ MP pump series

Design:multi-stage, closed impellers
Head:up to 950 m
Flow rate:up to 400 m³/h
Pressure:up to 100 bar
Temperature:up to 160° C
Power:up to 600 kW

Product benefits

  • Horizontal design with a closed impeller and external bearing assemblies on both sides
  • Axial heat expansion by the pump rotor is absorbed internally without influencing the coupling alignment
  • Easy maintenance

High-pressure pumps, HP series

ANDRITZ multi-stage high-pressure pumps from the HP series are used for various industrial applications such as water supply, irrigation, for hot and cold water circulation, firefighting, boiler feed and pressure boosting installations. They are suitable for transporting all clean or slightly dirty non-corrosive liquids up to a viscosity of 150 mm²/s (cSt). Under difficult suction conditions (low NPSH-available), the pump can be provided with an axial inlet for cavitation-reducing flow entry pattern into the first stage impeller. For more information on our high-pressure pumps from the HP series please contact us directly.

ANDRITZ high-pressure pumps, HP43 series

ANDRITZ high-pressure pumps, HP43 series

© ANDRITZ

ANDRITZ HP pump series

Design:multi-stage, high-pressure
Head:up to 630 m
Flow rate:up to 850 m³/h
Pressure:up to 63 bar
Temperature:up to 140° C
Speed:up to 3,600 rpm
Efficiency:up to 90%

Product benefits

  • Numerous hydraulic units per model size guarantee a design at the optimal operating point
  • High efficiencies owing to optimized hydraulics
  • Optimal adaptability to the medium to be pumped 
  • All wearing parts are renewable without additional work on the casing parts

Find out more ...

Contacts
ANDRITZ Pumps Germany GmbH
Germany
Get in contact
ANDRITZ FZCO
Dubai Airport Free Zone (DAFZA)
Get in contact
ANDRITZ (China) Ltd.
P.R. China
Get in contact
ANDRITZ Separation and Pump Technologies India Private Limited
India
Get in contact
ANDRITZ HYDRO S.A.
Brazil
Get in contact
Downloads
  • ANDRITZ High-pressure pump - MP series PDF : 1.1 MB
  • ANDRITZ your partner for pumping solutions PDF : 13.6 MB