Skip to main content
ES products header photo

Processing Solutions for Electrical Steel

High-end applications with precision.

Custom-tailored processing lines for producing grain oriented (GO) and non-grain oriented (NGO) silicon steel.

Complete equipment, electrics and automation, terminal, process, and furnace technology.

Embedded with deep industry knowledge and decades of practical experience.

Customized solutions for silicon steel

The production of electrical steel is based on a sequence of precisely controlled process steps, refined to ensure consistent performance and high product quality.

The processing line with fully integrated furnace and silica removal technology

Annealing and Pickling Line (APL)

Silicon steel (non-grain-oriented (NGO) or grain-oriented (GO)) needs descaling like any other hot rolled material. In case of an annealing and pickling line, two process steps are combined: The material is continuously annealed for recrystallization, followed by a pickling section to remove all surface scale. Since silica (SiO2) is being removed with the scale, our highly efficient silica removal technology helps minimize clogging of pipes, reduces fouling of heat exchangers and minimizes SiO2 deposits throughout the system.

Cleaning, recrystallizing and coating NGO silicon steel at high speed

Annealing and Coating Line (ACL)

To finalize the NGO product the material needs a final annealing step to reach its desired properties necessary for its use in motors, generators, or the like. Before entering the furnace, the strip undergoes thorough cleaning. In the annealing furnace the strip is then exposed to a tightly controlled temperature treatment (up to 1100°C) in up to 100% hydrogen atmosphere at a very low dew point. As a final step, an insulating coating is applied with precise coating thickness distribution.

Precise atmosphere control for stable magnetic properties

Decarburizing and Coating Line (DCL)

Cold rolled grain oriented silicon steel strip is processed in a continuous annealing line to achieve primary recrystallization and an ultra low carbon level. This guarantees ageing resistance and stable magnetic performance for transformer core applications. Precise temperature and atmosphere control are critical throughout the process. This, together with an advanced cleaning section, ensures excellent strip surface quality. After annealing, magnesia coating prevents the coil-windings from sticking during subsequent batch annealing.
 

Premium transformer strip quality and magnetic performance

Flattening and Coating Line (FCL)

The thermal flattening process starts with thorough cleaning of the strip surface to remove all residual MgO. An in-line insulation coating is applied prior to entering the annealing furnace. The process happens under precisely controlled strip tension and atmosphere in the furnace to ensure optimal flatness, stress relief, and magnetic performance. Optional technologies, such as laser scribing for domain refinement can further enhance the product quality.

Let‘s get in touch!

ANDRITZ AG, Austria

Electrical steel processing